| 序号 | 英文 | 音标 | 词性 | 中文 |
| | control panel layout | | | 控制盘设计 |
| | control pass | | | 控制孔型 |
| | control pedestal | | | 控制架[台], 控制立柜 |
| | control peg | | | 控制桩 |
| | control performance | | | 控制性能 |
| | control period | | | 控制周期[期间] |
| | control piece | | | 对照件 |
| | control pillar | | | 控制器, 就地控制器 |
| | control piston | | | 控制活塞 |
| | control plane | | | 控制面, 舵面,[航空]制导机 |
| | control plant | | | 对照植物 |
| | control plate | | | 操纵板, 控制板 |
| | control platform | | | 操纵台, 控制平台 |
| | control plot | | | 对照区 |
| | control plotting | | | [测]控制点展绘 |
| | control point adjustment | | | 调整点的调整, 检验点的装定, 被调量的装定 |
| | control point set | | | 控制点装定 |
| | control point synchronizer | | | 控制点同步器 |
| | control policy | | | 控制策略 |
| | control port | | | 控制油口 |
| | control position indicator | | | 控制示位器 |
| | control potentiometer | | | 控制电位计, 检测电位器 |
| | control problem | | | 控制问题 |
| | control processor | | | 控制处理机 |
| | control production | | | [采矿]控制生产 |
| | control properties | | n. | [计]控制属性 |
| | control punch | | | 控制孔, 标志孔 |
| | control quantity | | | 控制量, 控制变量 |
| | control range | | | 控制范围 |
| | control region | | | 控制区, 操作区 |
| | control register | | | 控制寄存器, 程序计数器 |
| | control relationship | | | 控置关系 |
| | control relay | | | 控制继电器, 监测继电器 |
| | control report | | | 管理报告 |
| | control requirement | | | 控制条件 |
| | control reservoir | | | 控制风缸 |
| | control resolution | | | 控制分辨能力 |
| | control response | | | 调节作用 |
| | control reversal | | | 操纵反效[反向] |
| | control rod | | | (核子)控制棒, 操纵[驾驶]杆 |
| | control rod continuous withdrawal | | | 连续提出(控制)棒 |
| | control rod expulsion | | | 控制棒抛出 |
| | control rod follower | | | 控制捧后随部, 随动棒 |
| | control rod pair | | | 控制棒对 |
| | control rod servosystem | | | 控制棒伺服系统 |
| | control rod withdrawal sequence | | | 提(控制)棒顺序 |
| | control roll | | | 导滚 |
| | control room | | | 仪表室 |
| | control rotary diaphragm | | | (抽汽式汽轮机用)旋转隔板 |
| | control routine | | | 控制代码, 控制例行程序 |
| | control routine interrupt | | | [自]控制例行程序中断 |
| | control sample | | | 对照试样 |
| | control sampling | | | 控制试样选择 |
| | control scum formation | | | 控制生膜 |
| | control segment | | | 控制部分 |
| | control selsyn | | | 控制式自整角机, 控制式自同步机 |
| | control sequence | | | 控制序列 |
| | control sequence table | | | 控制[操纵]顺序表 |
| | control servo motor | | | 控制伺服电机 |
| | control servo tab | | | (飞机)伺服调整片, 随动操纵片 |
| | control set | | | 控制设备 |
| | control shaft | | | 控制轴 |
| | control signal box | | | 主信号楼, 控制信号楼 |
| | control sleeve | | | (柴油机油泵的)油量调节套 |
| | control space | | | 控制空间, 控制室, 操纵台 |
| | control specimen | | | 检查标准用的试样 |
| | control spindle | | | 分配轴, 凸轮轴 |
| | control stand | | | 控制台 |
| | control stand cover | | | 操纵台罩 |
| | control state | | | [自]控制态 |
| | control statement | | | 控制语句 |
| | control station | | | 控制站, 控制点 |
| | control step | | | 控制步骤 |
| | control stick grip | | | 驾驶杆手柄 |
| | control store | | | 控制存储器 |
| | control strip | | | [摄]控制片 |
| | control structure constraint | | | 控制结构约束［受限］ |
| | control subassembly | | | 分控制组件 |
| | control subsystem | | | 控制分系统 |
| | control sum | | | 检核和 |
| | control surface | | | [力]控制面 |
| | control surface moment | | | 舵力矩 |
| | control surface position indicator | | | 控制面位置指示器, 舵面指示器 |
| | control survey | | | 控制测量 |
| | control switchgroup | | | 控制组合开关, 控制开关组 |
| | control synchro | | | 同步发送机, 控制同步机 |
| | control synchro differential transmitter | | | 控制式差动自整角发送机 |
| | control synchro transformator | | | 控制式自整角变压器 |
| | control synchro transmitter | | | 控制式自整角发送机 |
| | control system component | | | 控制系统部件 |
| | control system damping | | | 控制系统中的阻尼 |
| | control system dynamics | | | 控制系统动力学 |
| | control system servo | | | 操纵联动机构 |
| | control tab | | | 控制片 |
| | control tape | | | 控制(用纸)带 |
| | control technique | | | 防治技术 |
| | control telephone repeater station | | | 控制电话中继站 |
| | control terminal | | | 控制终端 |
| | control theory | | | 控制理论 |
| | control time | | | 时间传感器 |
| | control timer | | | 控制定时器, 时间传感器, 时间控制继电器 |